Touringwedge 15
Code: 7011000031
„A wedge does not have to sound nice, it has to be loud!“ We do not accept this kind of truism and started to developed our wedge on a blank sheet of paper. What are the most important aspects for a wedge? It should be lightweight, have a smooth frequency response and sound very dynamic. It should have an even and predictable dispersion pattern and its design should be sleek and discreet.
The AD-Systems TouringWedge.15 is a powerful 15“/1.4" coaxial system and is the best choice when highest levels of clean stage monitoring is required. An extraordinary reproduction of the voice, an accurate midrange and brillant high frequency are combined with an aesthetic design. Easy handling and exact defined dispersion provides the highest gain before feedback. Its functional design and brillant sound reproduction qualifies the TouringWedge to be a professional working platform for every artist and technician.
The woofer is equipped with a 3.5“ voice coil and offers an advantage of 15% more cooling surface compared with 3“ types. That enables our wedge to handle higher peaks without any problems. The sound conduction for the high frequency range is optimised by using an additional hornflare, all disadvantages have been eliminated by this way of construction. Flying points and a pole piece are integrated, so it is also possible to use the wedge as a front of house speaker if necessary.
TouringWedge.15 |
|
| Enclosure | 15 mm birch plywood with polyurea coating |
| Principle | coaxial, bass-reflex, semi-active |
| Protective grille | 2 mm steel, hexstamp, covered with acoustic foam from inside |
| Components | Coaxial 15“ neodymium low-mid speaker |
| 1.4“ neodymium compression driver with 2.5“ voice coil | |
| passive crossover with phase correction | |
| Frequency response | 60 Hz – 18 kHz +/-3 dB |
| Power handling RMS I peak | 600 W RMS | 1.800 W Peak |
| Impedance | 8 Ohm |
| Dispersion | 60 degr. circular |
| Sensitivity | 100 dB lo-mids, 107 dB high |
| SPLmax | 133 dB | peak | 1 m |
| Connectors | NL4: 1+/1- |
| Dimensions (w x h x d) | 590 x 357 x 517 mm |
| Weight | 23 kg |
| Accessories | double case, rigging frame |

